Kunshan Yongmao Machinery Make Co.,Ltd.
home page about us qualification products contact us company map e-book
view of outdoor Kunshan Yongmao Machinery Make Co.,Ltd.
products list   product introduction

Melamine Laminating Hot Press

Melamine laminating hot press for Multilayer panel (10 layers)
2 Melamine laminating hot press for Multilayer panel (10 layers) 2
Melamine laminating hot press for Multilayer panel (10 layers)

Maim technical data:
1.Nominal pressure:6000~12000kn
2.Finished panel size(L×W×H):2440×1220×(8~30)mm
3.Direction of board feed-in:2700mm side
4.Number of opening:10 layers
5.Hot platen specification:2700×1370×50mm
6.Number of hot platen:11 pcs
7.Daylight opening:120mm
8.Oil cylinder(diameter×stroke):?280×1200mm
9.Number of cylinder:4 pcs
10.Max.pressure of hydraulic system:25Mpa
11.Heating medium:saturation steam or thermal oil
12.Max.working temperature:250?
13.Control mode:automatic+manual
Veneer hot press Model BY214¡Á8/6-10
Veneer hot press Model BY214×8/6-10

Maim technical data:
1.Nominal pressure:6000kn
2.Hot plate Size: 1370×2700×55mm
3.Hot plate layer spacing: 120mm
4.Layers: 10 layers
5.fuel tank Bore: ?280mm 4, ?150mm 1
6.Cylinder number: 5
7.Cylinder stroke: 1200mm
8.Hydraulic system maximum working pressure:24 MPa
9.the pressure of steam (or hot oil) :6~8kg/cm2
10.Total motor power: 22kw
11.Overall dimensions (L×W×H): 3416×1370×5290mm
12.Net weight: 38 tons
Overlaying hot press Model BY214¡Á4/3-4
Overlaying hot press Model BY21×44/3-4

Main Technical Data:
1.Nominal pressure:300T
2.Hot plate Size: 1400×1400×42mm
3.Oil cylinder(diameter×stroke):f280×340mm
4.Daylight opening:85mm
5.Heating medium:Thermal oil 35KW
6.Total power:11KW
Technical Data of Short Cycle Overlaying Line Model YM12000-4¡Á8
Short Cycle Overlaying of single-layer hot press Model YM12000-4×8

Main Technical Data:
1.Total pressure:12000KN
2.Finished product size:(3-40)×1300×2500mm
3.Pressing cycle:According to technological requirement
4.Total power:~31kw
5.Thermal demand: 0.30MW(2510kcal/h)
6.Compressed air consumption:~0.6m3/min 0.6MPa
7.Hot platen size:1400×2600mm
8.Daylight opening:280mm
9.Main oil cylinder(diameter×stoke):
f320×280mm 6units
10.Lifting cylinder(diameter×stoke):
f63*280mm 4 units
11.Oil pressure of hydraulic system:=25MPa
12.Temperature of hot platen :=210?
13.Heating medium: Thermal oil
14.Feeding speed:15~40m/min
(adjusted by frequency converter)
15.Vacuum conveyor speed:15~40m/min(adjusted by frequency converter)
16.Mode of control:Visualization+PLC
17.Net weight:~40000kg
Vedio:Short Cycle Overlaying Line
Kunshan Yongmao Machinery Make Co.,Ltd.Allright Reserved.
Copyright © 1999-2017 www.rhemabh.com Allright Reserved.
The display resolution of 1280×1024 pix
大富彩票 秒速赛车投注 秒速赛车投注 博发彩票官网 秒速赛车投注 大富彩票 秒速赛车计划 秒速赛车投注 秒速赛车投注 秒速赛车投注